How to reverse parallel park (Single parked car)

Step 1

• Check mirrors and signal left for a minimum 3 seconds before coming to a stop next to the parked car (Blue vehicle)

• Park next to the car, approximately 1 metre away, with the side mirrors aligned.

Step 2

• Turn the steering wheel 180 degrees to the LEFT until it is upside down.

• Look out the rear window over your left shoulder to ensure the parking bay is clear.

Step 3

• Select Reverse gear.

• Reverse slowly back until the red guideline on the reversing camera is centred on the concrete kerb.

Step 4

• Turn the steering wheel fully to the RIGHT (full lock), approximately three complete turns.

Step 5

• Slowly continue to reverse back until your car is aligned with the car in front of you.

Step 6

• Straighten the steering wheel by turning it 1.5 complete turns to the LEFT.

• Select Drive and move forward until your vehicle is positioned 1–2 metres behind the vehicle in front.

• Put the vehicle into Park and apply the handbrake (if fitted).

When leaving the park:

• If your too close to the vehicle in front - Look back before reversing.

• Check mirrors and indicate RIGHT for at least 5 seconds.

• Make a head check after activating the turn indicator and immediately before pulling out from the kerb.